Faber HP80 Steel Tank – Gun Metal Grey

This triple-protected finish provides long-lasting durability. The process includes a zinc galvanizing spray, followed by an epoxy paint and then a top coat of polyurethane. The result is a beautiful cosmetic finish. 

– 3442 psi (237 bar) working pressure
– Phosphatized-cleaned interior 
– DOT SP13488 and TC SU7694-237
– Includes self-draining tank boot with round rim 
– Inlet thread is standard 3/4″-14 NPSM

– Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
– 3/4”-14 NPSM standard inlet threads
– Clean for pre-blended Nitrox up to 40% oxygen
– 1.5 handwheel rotations from fully on to fully off

	HP80
	3442 psi
	– 8.05 lbs
	– 1.74 lbs
	28.3 lbs
	7.25″
	20.8″
	68cc